【hp】workstation i2000 FreeBSD編
FreeBSD 5.0-RC2をインストールしました。
インストールの注意事項等は、後日。
FreeBSD 5.0-DP2が起動するところ
FreeBSD/ia64 EFI boot, Revision 0.3
(root@itanium.pn.xcllnt.net, Tue Nov 19 20:58:09 GMT 2002)
kernel data=0x70a2f0+0x56e20
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -h
Entering /kernel at 0xe000000000512000...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP2 #0: Wed Nov 20 00:39:41 GMT 2002
root@itanium.pn.xcllnt.net:/usr/obj/usr/src/sys/BOOTMFS
Preloaded elf kernel "/kernel" at 0xe000000001464000.
Preloaded mfs_root "/mfsroot" at 0xe0000000014640b0.
CPU: Itanium (733.46-Mhz)
Origin = "GenuineIntel" Model = 0 Revision = 6
Features = 0x0
real memory = 1056161792 (1007 MB)
avail memory = 1010368512 (963 MB)
FPSWA Revision = 0x10006, Entry = 0xe00000003f12e050
Initializing GEOMetry subsystem
md0: Preloaded image 8388608 bytes at 0xe000000000c61110
acpi0: on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xa08-0xa0b on acpi0
acpi_cpu0: on acpi0
acpi_cpu1: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: on pcib0
pci0: at device 0.0 (no driver attached)
isab0: at device 3.0 on pci0
isa0: on isab0
atapci0: port 0x1070-0x107f at device 3.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: at device 3.2 (no driver attached)
pci0: at device 3.3 (no driver attached)
pci0: at device 4.0 (no driver attached)
fxp0: port 0x1000-0x103f mem 0xfdf00000-0xfdffffff,0xfddef000-0xfddeffff irq 44 at device 5.0 on pci0
fxp0: Ethernet address 00:d0:b7:f9:ff:62
inphy0: on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: at device 16.0 (no driver attached)
pcib1: on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci1: on pcib1
isp0: port 0x2000-0x20ff mem 0xfbfdf000-0xfbfdffff irq 19 at device 0.0 on pci1
pci1: at device 15.0 (no driver attached)
pcib2: on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci2: on pcib2
pci2: at device 15.0 (no driver attached)
pcib3: on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci3: on pcib3
pci3: at device 0.0 (no driver attached)
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
psm0: irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: cannot reserve I/O port range
sc0: on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 0.976 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acd0: DVD-ROM at ata0-master PIO4
afd0: 229MB [262/32/56] at ata0-slave PIO4
Waiting 5 seconds for SCSI devices to settle
da0 at isp0 bus 0 target 2 lun 0
da0: Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 17522MB (35885448 512 byte sectors: 255H 63S/T 2233C)
Mounting root from ufs:/dev/md0
WARNING: clock gained 25 days -- CHECK AND RESET THE DATE!
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
5 ...................... xterm terminal emulator.
Your choice: (1-5)
FreeBSD 5.0-RC1が起動するところ
FreeBSD/ia64 EFI boot, Revision 1.0
(root@mckinley.pn.xcllnt.net, Fri Dec 6 03:11:58 GMT 2002)
kernel data=0x72cb30+0x58380 /
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -h
Entering /kernel at 0xe000000000512000...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC1 #0: Fri Dec 6 05:54:40 GMT 2002
root@mckinley.pn.xcllnt.net:/usr/obj/usr/src/sys/BOOTMFS
Preloaded elf kernel "/kernel" at 0xe000000001488000.
Preloaded mfs_root "/mfsroot" at 0xe0000000014880b0.
CPU: Itanium (733.46-Mhz)
Origin = "GenuineIntel" Model = 0 Revision = 6
Features = 0x0
real memory = 1056161792 (1007 MB)
avail memory = 1014300672 (967 MB)
FPSWA Revision = 0x10006, Entry = 0xe00000003f12e050
Initializing GEOMetry subsystem
md0: Preloaded image 8388608 bytes at 0xe000000000c84eb0
acpi0: on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xa08-0xa0b on acpi0
acpi_cpu0: on acpi0
acpi_cpu1: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pci0: at device 0.0 (no driver attached)
isab0: at device 3.0 on pci0
isa0: on isab0
atapci0: port 0x1070-0x107f at device 3.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: at device 3.2 (no driver attached)
pci0: at device 3.3 (no driver attached)
pci0: at device 4.0 (no driver attached)
fxp0: port 0x1000-0x103f mem 0xfdf00000-0xfdffffff,0xfddef000-0xfddeffff irq 44 at device 5.0 on pci0
fxp0: Ethernet address 00:d0:b7:f9:ff:62
inphy0: on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: at device 16.0 (no driver attached)
pcib1: on acpi0
pci1: on pcib1
isp0: port 0x2000-0x20ff mem 0xfbfdf000-0xfbfdffff irq 19 at device 0.0 on pci1
pci1: at device 15.0 (no driver attached)
pcib2: on acpi0
pci2: on pcib2
pci2: at device 15.0 (no driver attached)
pcib3: on acpi0
pci3: on pcib3
pci3: at device 0.0 (no driver attached)
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
psm0: irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: cannot reserve I/O port range
sc0: on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Timecounter "IA64 ITC" frequency 733463984 Hz
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acd0: DVD-ROM at ata0-master PIO4
afd0: 229MB [262/32/56] at ata0-slave PIO4
Waiting 5 seconds for SCSI devices to settle
da0 at isp0 bus 0 target 2 lun 0
da0: Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 17522MB (35885448 512 byte sectors: 255H 63S/T 2233C)
Mounting root from ufs:/dev/md0
WARNING: clock gained 9 days -- CHECK AND RESET THE DATE!
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
5 ...................... xterm terminal emulator.
Your choice: (1-5)
←もくじに戻る